Array
Array
Konfigurasi Awal mikrotik
Konfigurasi Awal mikrotik
Udah beres instal mikrotik nya?? sekarang tantangan ke-2 setelah nginstal yaitu Configure.
Pertama-tama untuk bisa configure si mikrotik ini, tentu aja kamu harus login dulu…
Kita mulai ya,,,
Topologi nya:
<Modem>—–<Mikrotik Router OS>—–<Switch>—-<Client>
1. Rubah nama interface
Quote:
[uye@mikrotik]> interface
[uye@mikrotik] interface > pr
Flags: X – disabled, D – dynamic, R – running
# NAME TYPE RX-RATE TX-RATE MTU
0 R Ether0 ether 0 0 1500
1 R Ether1 ether 0 0 1500
[uye@mikrotik] interface > edit 0 -> Trus rubanama nya misal dari Ehter0 jadi WAN[ctrl+o]
karena saya pemalas jadi gak dirubah2, hehe
saya asumsikan
Ether0 = wan – xxx
Ether1 = LAN – yyy
2. Konfigurasi IP Address
Sebelum bisa pake winbox untuk konfigurasi lebih lanjut, kita harus udah konfigurasi in dulu ip address nya:
Quote:
[uye@mikrotik]> ip address
[uye@mikrotik] ip address> add address=xxx.xxx.xxx.2/30 interface=Ether0
[uye@mikrotik] ip address> add address=yyy.yyy.yyy.1/24 interface=Ether1
[uye@mikrotik] ip address> pr
Flags: X – disabled, I – invalid, D – dynamic
# ADDRESS NETWORK BROADCAST INTERFACE
0 xxx.xxx.xxx.2/30 xxx.xxx.xxx.0 xxx.xxx.xxx.7 Ether0
1 yyy.yyy.yyy.1/24 yyy.yyy.yyy.0 yyy.yyy.yyy.255 Ether1
[uye@mikrotik] ip address>
3. Konfigurasi IP Route
Biar si-routing table ngarah ke isp/gateway
Quote:
[uye@mikrotik]> ip route add gateway=xxx.xxx.xxx.1
[uye@mikrotik]> ip route pr
Flags: X – disabled, A – active, D – dynamic, C – connect, S – static, r – rip, b – bgp, o – ospf
# DST-ADDRESS PREF-SRC G GATEWAY DISTANCE INTERFACE
0 ADC yyy.yyy.yyy.0/24 yyy.yyy.yyy.1 Ether1
1 ADC xxx.xxx.xxx.0/30 xxx.xxx.xxx.2 Ether0
2 A S 0.0.0.0/0 r xxx.xxx.xxx.1 Ether0
[uye@mikrotik]>
4. Konfigurasi DNS
Quote:
[uye@mikrotik]> ip dns set primary-dns=202.155.0.10
[uye@mikrotik]> ip dns set secondary-dns=202.155.0.15
[uye@mikrotik]> ip dns pr
primary-dns: 192.168.1.1
secondary-dns: 202.155.0.15
allow-remote-requests: no
cache-size: 2048KiB
cache-max-ttl: 1w
cache-used: 1849KiB
[uye@mikrotik]>
5. Konfigurasi NAT~wajib neh
Biar jaringan kita g kliatan dari luar(secara kasar)
Quote:
[uye@mikrotik]> ip firewall add chain=srcnat out-interface=ether0 action=masqurade
Slese daeh,,,
sekarang coba ping ke gateway & dns dari mikrotik, kalo REPLY berarti dah Connect..
Gak Lupa,
Semoga Bermanfaat 
Halaman terkait
One Response
KLIK DONK ANU nya
Konfigurasi Awal mikrotik
Konfigurasi Awal mikrotik
Udah beres instal mikrotik nya?? sekarang tantangan ke-2 setelah nginstal yaitu Configure.
Pertama-tama untuk bisa configure si mikrotik ini, tentu aja kamu harus login dulu…
Kita mulai ya,,,
Topologi nya:
<Modem>—–<Mikrotik Router OS>—–<Switch>—-<Client>
1. Rubah nama interface
| [uye@mikrotik]> interface [uye@mikrotik] interface > pr Flags: X – disabled, D – dynamic, R – running # NAME TYPE RX-RATE TX-RATE MTU 0 R Ether0 ether 0 0 1500 1 R Ether1 ether 0 0 1500 [uye@mikrotik] interface > edit 0 -> Trus rubanama nya misal dari Ehter0 jadi WAN[ctrl+o] |
karena saya pemalas jadi gak dirubah2, hehe
saya asumsikan
Ether0 = wan – xxx
Ether1 = LAN – yyy
2. Konfigurasi IP Address
Sebelum bisa pake winbox untuk konfigurasi lebih lanjut, kita harus udah konfigurasi in dulu ip address nya:
| [uye@mikrotik]> ip address [uye@mikrotik] ip address> add address=xxx.xxx.xxx.2/30 interface=Ether0 [uye@mikrotik] ip address> add address=yyy.yyy.yyy.1/24 interface=Ether1 [uye@mikrotik] ip address> pr [uye@mikrotik] ip address> |
3. Konfigurasi IP Route
Biar si-routing table ngarah ke isp/gateway
| [uye@mikrotik]> ip route add gateway=xxx.xxx.xxx.1 [uye@mikrotik]> ip route pr Flags: X – disabled, A – active, D – dynamic, C – connect, S – static, r – rip, b – bgp, o – ospf # DST-ADDRESS PREF-SRC G GATEWAY DISTANCE INTERFACE 0 ADC yyy.yyy.yyy.0/24 yyy.yyy.yyy.1 Ether1 1 ADC xxx.xxx.xxx.0/30 xxx.xxx.xxx.2 Ether0 2 A S 0.0.0.0/0 r xxx.xxx.xxx.1 Ether0 [uye@mikrotik]> |
4. Konfigurasi DNS
| [uye@mikrotik]> ip dns set primary-dns=202.155.0.10 [uye@mikrotik]> ip dns set secondary-dns=202.155.0.15 [uye@mikrotik]> ip dns pr primary-dns: 192.168.1.1 secondary-dns: 202.155.0.15 allow-remote-requests: no cache-size: 2048KiB cache-max-ttl: 1w cache-used: 1849KiB [uye@mikrotik]> |
5. Konfigurasi NAT~wajib neh
Biar jaringan kita g kliatan dari luar(secara kasar)
| [uye@mikrotik]> ip firewall add chain=srcnat out-interface=ether0 action=masqurade |
Slese daeh,,,
sekarang coba ping ke gateway & dns dari mikrotik, kalo REPLY berarti dah Connect..
Gak Lupa,
Semoga Bermanfaat
Tags: 
very nice blog and excellent posting…
leave ur comment when u visit to my blog.
Interest programming C++, PHP or Java(later)? just visit All About Programming, read and leave comment…
Wannabe learn about blog, blogger visit me in Let Go Blogging